Troubleshooting Tips to Fix Not Working Issue

Not being able to access the page when you want to change the password of your Netgear wireless range extender can be really frustrating. But, worry not. What are we here for? In this article, we have mentioned some of the topmost troubleshooting tips that will help you get rid of the mywifiext not working issue before you poke your eye out due to frustration. So, read on. 

How to Fix Not Working Issue?

  • Check the Power Supply

Before you do anything else, check whether your Netgear extender is receiving proper power supply from the wall outlet. If it isn’t, then that’s definitely because the wall outlet to which your exteder is plugged in is damaged. To get the issue fixed, it is recommended that you plug your Netgear extender into a different wall outlet.

  • Connect Your WiFi Devices Properly

If you have made the mistake of connecting your Netgear extender and router using a damaged Ethernet cable, rectify it right away. Make sure that the cable connecting your devices is not damaged. 

Note: You also have the option of connecting your Netgear extender and router wirelessly.

  • Use the Correct Web Address

If you haven’t used the correct web address, then also you can come across the not working issue. Thus, make sure that you type the correct web address into the address bar of your web browser. 

Note: Consider using mywifiext local instead of mywifiext net to log in to your device if you’re using an Apple device.

  • Update the Web Browser

Are you using an outdated web browser? Well, looks like it! Otherwise, you won’t be facing the not working issue. But, worry not! Simply update your web browser and get rid of the issue in a jiffy.

  • Perform Netgear Firmware Update

Updating the firmware of your Netgear WiFi range extender to the latest version can also help you troubleshoot the not working issue. Therefore, wait no more and perform Netgear extender firmware update immediately. 

If you are not sure regarding the firmware update process of your extender, then it is recommended that you refer to the user manual.

  • Reset Your Netgear Extender

If nothing so far got you out of the mess you’re currently in, then resetting your Netgear extender is your last resort. 

Here are the guidelines that you should go through to restore your wireless range extender to the factory default settings:

  • Look for the Reset button located on your Netgear range extender.
  • Then, carefully press it using a paper clip or toothpick.
  • Wait for some time and let your wireless device get restored to the default mode. 

Once you are done resetting your Netgear extender, reconfigure it, and change its default password. 

How to Change Netgear Extender Default Password?

By following the below-mentioned instructions, you’ll be able to change the default password of your Netgear extender:

  • Switch on your computer and connect it to Netgear_ext.
  • Open an internet browser. 
  • In the address bar of the web browser, type, and press Enter. 
  • The Netgear extender login page will come into view.
  • Fill the default login credentials into their respective fields. 
  • Click Log In.
  • Go to Settings > Wireless Settings.
  • Under the Password field, enter the new password you want your device to have. 
  • Click Apply. 

In some time, the changes you’ve made to your device will get saved.

The Bottom Line

This was all about how to troubleshoot not working issue. We hope that after following the troubleshooting tips mentioned in this post, you’ll easily be able to access and change the default password of your Netgear range extender. 

click here for more articles

Leave a Reply

Your email address will not be published.