Pool floor cleaning in 6 simple steps

In order for the bathing fun to remain in the foreground, rainforest trail tofino the pool floor must be cleaned regularly. It is not enough just to fish the dirt from the surface and brush a little on the walls.

Pool owners should do this sometimes annoying work regularly, otherwise, it can lead to damage to the pool or even health-endangering scenarios. Furthermore, a clean pool floor also invites you to swim.

This article explains how in a few steps the pool floor looks new again. And the best thing is that the procedure is relatively fast.

Preparation: Rinse the filter

Before starting to clean the pool floor, the basis must first be created for me to make the effort profitable.

The biggest shortcoming in this context would be the pool filters. Over time, more and more dirt and grime settle there.

Therefore, pool owners are required to clean the filters in advance of pool floor cleaning by repeated pre- and backwashing.

Step 1: Create the foundation with leaf and soil nets

Most of what comes into the pool sink to the ground over time. Therefore, cleaning the pool floor is best done by preventing the supply of further contaminants.

Pool owners should free the water surface from leaves and Co. daily with a leaf jar. For this to work at all, the possession of a telescopic rod is indispensable.

This handle extension makes it possible to carry out the cleaning work flexibly from the edge of the pool – and the entire pool can be reached.

With the bottom net, the coarse dirt of the pool floor is then removed.

Even with daily use of the leaf net, it can usually not be prevented that various dirt sinks to the bottom of the pool.

Therefore, it is advisable to “work” the pool floor daily with the bottom net.

Step 2: pH and chlorine values must be correct

PH is perhaps the most important quantity when it comes to the proper health of the pool. It should be between 7.0 and 7.4. If the pH value is too low, this usually irritates the eyes and skin of people bathing in the pool.

If the value is above 7.4, this reduces the disinfecting effect of the chlorine. If this is impaired, algae, for example, have an easy time spreading in the pool.

In the worst case, this will discolor the pool – including the floor. If the pH value is within the given range, this must also apply to the chlorine.

The chlorine content in the domestic pool should be between 0.5 and 1 mg/l. If the value falls below the lower limit, bacteria and algae spread in the pool – exactly what no pool owner on this planet wants.

If the value is above 1, this manifests itself in irritation of the eyes and skin as well as corrosion processes in metal objects within the pool. By means of various methods (test strips, electronic measuring device) the mentioned values can be checked.

The pH value can be changed upwards and downwards by adding “pH-Plus” and “pH-Minus”. For chlorine, there are various granules that adjust the value upwards.

To get the chlorine content in the pool down, the pool owner should add less chlorine to the water. Furthermore, it is possible to let the natural decomposition process happen by waiting.

Step 3: Brush the floor with the pool brush

The pool brush is another “must-have” of every pool owner. And the reason is simple. It is easy to brush away impurities from the walls or the floor “XY” in the pool.

When buying a pool brush, it is therefore particularly important that it is stable and does not break at the slightest resistance. By means of the telescopic rod already mentioned above, the floor can be brushed off comfortably from the outside of the pool.

There are pool brushes on the market that can be used together with a hose. Dan has built a small pool cleaner independently and everything that is brushed off is transported out of the pool as quickly as possible.

Step 4: The pool vacuum cleaner

After impurities, such as. B algae have been brushed off, and a pool vacuum cleaner or pool robot can be used. This drives (just like the vacuum cleaner robot on land) over different surfaces in order to suck in the dirt.

The pool vacuum cleaner can also descend the walls of a pool, which the counterpart on land definitely can’t. In the case of stubborn dirt, the pool vacuum cleaner will reach its limits – here other calibers have to be driven.

Step 5: Ultima Ratio

If the previous steps were still not sufficient to put the pool floor in a clean state, then probably only the ultima ratio helps. The pool must be drained and only when all the water has disappeared from the pool can it go to the preserves.

Now a remedy is needed to remove the deposits from the pool floor. It is recommended to buy a swimming pool or intensive cleaner. The preparation is applied to the affected areas and then left to act for a while.

That the dirt is permeated by the detergent down to its deepest pores. In the next step, the dirt can be rinsed off with lukewarm water (from a hose). Now the pool floor should be back in perfect condition.

Also, read about Painters & Decorators in Camberwell.

Step 6: Prevent future contamination

In order for the pool floor to remain in this clean condition for as long as possible, it is worthwhile to rely on preventive measures.

In particular, travel resorts of america pool owners should shield the pool from the influences of the environment with a pool cover while it is not in use. Because dirt that has not even fallen into the pool does not have to be removed.

The filter system and pool pump should be regularly maintained. In addition, it must be ensured that the pool is completely circulated between two and three times in one day. PH and chlorine content should be measured regularly so that immediate action can be taken in the event of changes.

Leave a Reply

Your email address will not be published.