How to Hang Curtains Without Drilling

If you aren’t a fan of drilling holes in your walls or ceilings, then you can use adhesive hooks to hang your curtains. Each hook can support half of the total weight of the curtain. For example, you will need two 16-pound adhesive hooks for a total curtain weight of 32 pounds (15 kg). Many brands of adhesive hooks now offer stylized versions that mimic wood or steel nails for aesthetic reasons. Mark holes with a pencil to determine where to place the hooks.

Tension rods

If you don’t want to drill holes into your walls, tension rods may be your best option. These rods are held up by two hard surfaces, a wall and ceiling. These rods can be made to fit between these two surfaces and are available in nickel and dark espresso finishes. If you have a metal surface such as a kitchen island, a tension rod may be the best option for you.

Before you start drilling holes into your walls, you should first measure the windows. If the walls are already drilled, you should first measure the length and width of your windows before you purchase tension rods. Then, mark four corners of the ceiling and the center point of both sides of the bed. Then, proceed to install the tension rod. Be careful not to fall out while you’re working on the project!

Upholstery tacks

One alternative to curtain rods for those renting a room is to use upholstery tacks. Although they do not have the same strength as curtain rods, they are still suitable for hanging stationary wall curtains. In addition to being inexpensive, upholstery tacks are also suitable for renters, as they do not damage the wall or ceiling. And since they can be purchased from a local dollar store, you’ll be able to find them easily.

When choosing the right hardware, consider your decorating preferences. If you have drop ceilings, flexible track drapery hardware with clamps is a good option. For basements, window panels are located at ceiling level, making hanging a curtain rod impractical. In such cases, upholstery tacks, tension cables, staples, furring strips, and cabinet knobs are all great alternatives to a traditional curtain rod.

Coat hooks

Hanging curtains without drilling is not a difficult task. There are several ways to hang curtains, but the simplest is to use a wooden dowel. The use of coat hooks is less obvious, but can also be effective if you have a rental property. If you want to keep your curtains from being smashed, you can also use sticky hooks. These hooks don’t require drilling, and they can be removed and moved around without damaging the walls.

Coat hooks are great for hanging curtains without drilling holes. They also add versatility to any room. Before hanging curtains with coat hooks, you will need to apply high-performance adhesive to the surface of the wall. Once the adhesive is dry, you can then hang your curtains. But you must ensure that the distance between coat hooks is even. You can also use tension rods to hang light curtains on a small window.

Kwik-Hang brackets

When you’re looking for a new way to hang curtains, Kwik-Hang brackets are an excellent option. They have a unique design that eliminates the need to drill holes in the window frames. The brackets come in a wide variety of sizes, and Derrek Dawson has patented his product to protect the company’s trademark design. In his Shark Tank episode, Derrek said that he started the company because customers were requesting a way to hang their curtains.

While there are a number of ways to hang curtains, no-drill brackets are a reliable and convenient solution. They are available in a variety of colors, and can support up to 20 pounds of weight. They can also be used with traditional curtain rods to hang heavier drapes. No-drill brackets are not suitable for doors and windows, so they should be installed using drywall anchors or screws to avoid potential damage to the walls.

PVC pipe

Installing a curtain rod does not require drilling holes in the walls. You can install a rod by screwing it into a belt loop and inserting the curtain into it. The end caps complete the rod. After it is screwed into the belt loop, slide the rod to one side and insert the curtain into it. Then, screw the end caps back in. Then, you are ready to hang the curtains.

Another great alternative to traditional curtain rods is copper pipes. This type of pipe comes in a variety of styles and colors. When installing a custom rod, choose a piece of copper that is thin enough to fit into the curtain hooks or loops. This pipe is durable and sturdy enough to support the weight of the curtains without damaging the drywall. Regardless of its materials, it is an excellent option for people who don’t want to drill holes in their walls.

Command hooks

Rather than drill holes, you can use Command hooks for hanging curtains instead. These strips of adhesive work on various surfaces and can hold up to five pounds of weight. You can use them on light curtains, as well as heavy ones. Command hooks are easy to install and remove. They are an inexpensive alternative to nails and screwdrivers. There are different types and sizes of Command hooks. Some are made from plastic, others from metal.

To install Command hooks, first measure the length of your curtains. If you want to hang them at a certain height, you’ll need a bolt cutter. If the wall is textured, you may need to scrape the walls first. Once you’ve cut the command hooks to size, clean the area with rubbing alcohol to prevent stains. You can then use a plastic primer or paint them the same color as your wall.

Leave a Reply

Your email address will not be published.