Detailed Guide to Resolve Linksys Extender Orange Light Issue

If the LED light on your Linksys wireless range extender is blinking orange, it might be because of the following reasons:

  • Your extender is not receiving an adequate power supply from the socket.
  • The Ethernet cable connecting your extender and router is damaged.
  • The signals of your extender are either getting interrupted or blocked.
  • Your wireless device is not running on an updated firmware version.
  • You have placed your Linksys extender far from the existing router.
  • Technical glitches can also lead you to the extender orange light issue.
  • You haven’t properly performed the Linksys WiFi setup  process.

Regardless of what might have caused the Linksys extender orange light issue, following the troubleshooting hacks mentioned below will surely help you fix it. Thus, scroll down and read on.

Fixed: Linksys Extender Orange Light Issue

Fix 1: Reboot Your Linksys Extender

By eliminating technical glitches, you will be able to get rid of at least one reason leading you to the Linksys extender orange light issue. To eliminate the glitches, you need to reboot your device. Here is how you can do that:

  • Turn off your Linksys wireless range extender.
  • Unplug your extender from the wall socket it is plugged into.
  • Wait for a couple of seconds.
  • Plug your extender back into the wall socket it was earlier plugged into.
  • Turn the device on.

If you are still struggling with the Linksys extender orange light issue, read the next troubleshooting hack.

Fix 2: Replace the Ethernet Cable

Chances are that you did not check the condition of the Ethernet cable before using it to connect your Linksys wireless range extender and your home router. To rectify your mistake, it is recommended that you replace your cable with a new one.

If doing so doesn’t work in your favour either, then consider connecting your devices with the help of a wireless source.

Fix 3: Bring Your Devices Closer

If the distance between your Linksys wireless range extender and your home router is too much, that can make it difficult for your devices to communicate properly. Therefore, unplug your extender from the wall socket it is currently plugged into and plug it into the one located near your home router.

Now, check whether the Linksys extender orange light issue persists. If it does, continue reading this post.

Fix 4: Perform Linksys Firmware Update

You can try performing Linksys extender firmware update to troubleshoot the issue you are experiencing right now.

Here is how you can update the firmware of your device to the latest version:

  • Switch on your PC or laptop.
  • Launch an internet browser.
  • In the address bar of your browser, type extender.linksys.com.
  • Press the Enter key.
  • Once you are on the official login page of your device, enter the default admin details and click the Log In button.
  • Head over to the Settings menu.
  • Under the Maintenance section, click the Firmware Update button.

In some time, the firmware of your Linksys wireless range extender will get updated to the latest version.

Note: If you also want to update the firmware of your Linksys wireless router, it is recommended that you refer to the Linksys router login  page.

Fix 5: Say No to Signal Interference

Make sure that your Linksys wireless range extender is not placed anywhere near cordless phones, washing machines, baby monitors, Bluetooth speakers, mirrors, fish tanks, treadmills, televisions, refrigerators, microwave ovens, aluminium studs, corners, and concrete walls.

Fix 6: Check the Power Socket

As mentioned above, an improper power supply can also force you to experience the Linksys extender orange light. To troubleshoot the issue, it is recommended that you plug your Linksys wireless range extender into a different power socket.

Fix 7: Reset and Reconfigure Device

Did none of the aforementioned troubleshooting hacks help you fix the orange light issue? Well, in that case, it is recommended that you reset your wireless device. Once you are done restoring your device to the factory default mode, don’t forget to reconfigure your extender.

The Conclusion

With that, our guide to troubleshoot Linksys extender orange light issue has come to an end here. We hope that after following the troubleshooting hacks mentioned above, you will surely be able to get rid of the issue you were facing with the device.

Leave a Reply

Your email address will not be published.