Complete Guide to Fix TP-Link Firmware Update Failure Issue

Every TP-Link wireless repeater comes embedded with software called firmware. This firmware takes care of the overall functionality of your WiFi device. Whenever your device has a pending firmware update, it is recommended that you convert the status from ‘pending’ to ‘updated’.

What happened? Are you not able to perform TP-Link firmware update by accessing http://tplinkrepeater.net? If you are nodding your head in yes, consider walking through this article. Here, we have shed light on the topmost troubleshooting hacks following which you will surely be able to get rid of the TP-Link repeater firmware update failure issue.

Fixed: TP-Link Firmware Update Failure Issue

  1. Reboot Your TP-Link Repeater

Technical glitches are one of the biggest factors contributing to the TP-Link repeater firmware update failure issue. To bid adieu to these glitches, consider rebooting your wireless device. Here is how you can do that:

  • Disconnect all your wireless devices connected to the network of the repeater.

  • Turn off your TP-Link repeater.

  • Unplug the repeater from its electrical outlet.

  • Wait for a couple of seconds.

  • Plug your repeater back into its electrical outlet.

  • Turn on your tplinkrepeater.
  • Reconnect your device to the network of your TP-Link wireless repeater.

Once you are done rebooting your TP-Link wireless repeater, try to update the firmware. Are you able to? No? Well, in that case, continue reading this post.

  1. Verify the Ethernet Connection

Check the Ethernet cable maintaining a connection between your TP-Link wireless repeater and your home router. If it is worn out or damaged, consider getting it replaced with a brand new cable immediately.

If you have lost faith in a wired connection, then it is recommended that you connect your devices with the help of a wireless connection.

Note: Apart from ensuring a secure connection between your devices, keep in mind that the distance between them is not too much. Otherwise, their WiFi signals might get interrupted and lead you to further technical issues.

  1. Call Your Internet Service Provider

If your Internet Service Provider is not doing his job properly, then also you can come across the TP-Link repeater firmware update failure issue.

Therefore, get in touch with your Internet Service Provider. If he agrees that the internet issue is from his side, ask him to get it fixed immediately.

  1. Check the Login Credentials

In order to update the firmware of your TP-Link wireless repeater, you need to access the Quick Setup wizard. And to access the wizard, you need to enter the correct login username and password.

There is a possibility that you have not entered the correct admin details to update the firmware of your device. To troubleshoot the issue, make sure that you use the correct tplinkrepeater.net login credentials to log in to your extender.

  1. Avoid Signal Interference

Do not make the mistake of placing your TP-Link wireless repeater near any of the following things:

  • Cordless phones

  • Washing machines

  • Baby monitors

  • Bluetooth speakers

  • Mirrors

  • Fish tanks

  • Treadmills

  • Televisions

  • Refrigerators

  • Microwave ovens

  • Aluminium studs

  • Corners

  • Concrete walls

Also, do not place your TP-Link wireless repeater near utensils containing water.

Once you are done following these troubleshooting hacks, try to perform TP-Link repeater firmware update.

How to Perform TP-Link Repeater Firmware Update?

  • Switch on your computer.

  • Open an internet browser.

  • In the address field of the browser, type the default web address.

  • Press the Enter key.

  • The TP-Link repeater login page will come into view.

  • Enter the default admin username and password.

  • Click the Log In button.

  • Once you are on the Quick Setup wizard, click the Settings option.

  • Under Maintenance, select Firmware Upgrade.

  • Select Browse.

  • Click Upload.

  • In some time, the firmware of your TP-Link repeater will get updated.

With that, you will be able to perform TP-Link repeater firmware update with ease.

Note: You can also update the firmware of your TP-Link wireless repeater using the Tether application.

Conclusion

After following the troubleshooting hacks mentioned above, you will surely be able to get rid of the TP-Link repeater firmware update failure issue. If you are aware of any other way through which this particular issue can be resolved, do let your fellow readers know via the comment section.

Did you like reading this article? Whatever the answer may be, do share feedback.

Leave a Reply

Your email address will not be published.